The Compressor Technologies company makes and sells spare parts for the 2VM4-27/9 2VM4-27/9C compressor
All manufactured and supplied products are provided with a certificate of conformity and quality certificate
The compressor 2VM4-27/9, 2VM4-27 / 9C is used in industry to produce compressed air with an excess pressure of 9 kgf / cm2. The compressor 2VM4-27/9, 2VM4-27/9C is able to meet the needs of the volume of 27 m3/min.Name and drawing number |
---|
Base 304M-0-01sb |
Air collector V-2 GOST90028-76 |
Electric motor A2K85/24UHL4 |
Cooling unit 067344.001 |
Safety valve 2st. KP20. 00. 00. 000 |
Safety valve 1st. KP40. 00. 00. 000 sb |
Frame 104M-1-07 |
Kreukopf sleeve 104M-12 |
Receiving filter 202P-6-1 sb |
Crankshaft E-4M-2-1 in sb. s podsh. 3528 and shestr. 105P-2-5 |
Crankshaft E-4M-2-1 |
Bearing 3528 GOST 5721-75 |
Spiral gear 105P-2-5 |
Crosshead in sb. 104M-3. 0sb |
Crosshead 104M-3-1 |
Crosshead pin 104M-3-1. 0c. |
Stem nut embedded 105P-3-2 |
Lock Nut 5P-3-1 |
Locking ring 4M-3-3 |
Crosshead assembly 304M-3.0-01sb |
Crosshead 304M-3-1 |
Crosshead pin 204M-3-3 |
Lock Nut 304-3-8 |
Locking ring 4M-3-3 |
Earring 751 & nbsp; 745.001 |
Connecting rod assembly 204M-4.0-01sb |
Connecting rod 204M-4-1. 0-01 |
Connecting rod bushing 304M-4-1-2 |
Connecting rod bolt 4M-4-2 |
Connecting Rod Bolt Nut 4M-4-3 |
Insert A23. 01-14001 |
Insert A23. 01-14002 |
Lubrication unit in sb. 104M-5. 0sb |
Station (lubricator) 31-04-2 UHL4 |
Check valve 308 & nbsp; 593.001 sat |
Block body 104M-5-1 |
Bearing housing 4M-5-4 |
Fitting 104M-5-8 |
Fine filter 63-125-2 UHL4 |
Oil pump shestr. 4M-5-10sb |
Pump housing 5P-5-1-1-01 |
Leading roller 4M-5-10-1 |
Bracket 5P-5-1-2 |
Spiral Shestenya 5P-5-1-4 |
Bushing 5P-5-1-5 |
Bushing 5P-5-1-5-01 |
5P driven roller-5-1-6 |
Driving gear 2SG50-0705 |
Driving gear 2SG50-0706 |
Bushing 2SG50-0709 |
Bushing SA8-0708 |
Cylinder 1st. in sb. 304 & nbsp; 141. 007sb |
Cylinder 1st. 731 & nbsp;228 003 |
Cylinder cover 1st. 712 & nbsp; 322.001 |
Cylinder liner 1st. 713 & nbsp;642. 001 |
Valve 1st. PCC 180V-1,2 |
Valve 1st. PCC 180N-1,2 |
Valve PEAK 180-0. 4 AM 1st. |
Valve PEAK 180-1, 6 AM 1st. |
Spacer ring KP180 |
Set of PIK 180-0. 4 AM plates |
Set of PIK 180-1,6 AM plates |
Locking bar PEAK 100-4, 0/27 |
Pressure cup 1st. 713 322. 001 |
Pressure cup 1st. 304111.001 sat |
Valve cover 1st. 731 & nbsp; 392. 001 |
Piston 1st. v sb 306 & nbsp; 571.001 sb |
Piston 1st. (half of the piston 723 & nbsp; 595.011 |
Ring 711 & nbsp; 414. 013 |
Stock 1st. f42mm 104M45. 01. 00. 002 |
Stock 1st. f40mm 4M45. 01. 00. 002 |
Stem Nut 1st. 758 & nbsp; 411.001 |
Ring porsche. 1st. 450x13x9 STPO501-124-78 |
Cylinder 2st. v sb 304 141. 008sb |
Cylinder 2st. 731 & nbsp; 228. 002 |
Cylinder cover 2st. 712 & nbsp; 322.002 |
Cylinder liner 2st. 713 & nbsp;642. 002 |
Valve 2st. LU100-2,5 |
Glass push. 2st. 304 & nbsp; 111. 002sb |
Glass pressure. 2st. 713 & nbsp;322. 002 |
Piston 2st. v sb 306 & nbsp;571. 002sb |
Piston 1st (half of the piston) 723 595. 012 |
Stock 1st F 42 104m45. 01. 00. 002-01 |
Stock 1st f 40 & nbsp;4m45. 01. 00. 002-01 |
Stem Nut 758 & nbsp; 411.001 |
Ring porsche. 2st. 250x8x7STPO501-124-78 |
Oil seal assembly 42-128-305 321 |
Name | Designation |
---|---|
Crankshaft | E-4M-2.1 |
Connecting rod | 204M-4.1.0 sat |
Insert | VK140-01/02 |
Bushing | 304M-4.1.2 |
Connecting Rod bolt | 4M-4.2 |
Connecting Rod Nut | 4M-4.3 |
Stock 1st. | 104M45. 01. 00. 002-04 |
Stock 2st. | 104M45. 01. 00. 002-05. |
Sleeve 1st. | 713642.001-01 |
Sleeve 2st. | 713642.002-01 |
The Kreutz cartridge case. | 104M-2 |
Piston & nbsp; 1st. | 72.3595.003 |
Piston & nbsp; 2st. | 723595.004 |
Ring upl. 1st. | 723221.001 |
Support ring. 1st. | 754176.001 |
Ring upl. 2st. | 723221.001-01 |
Support ring. 2st. | 754176.001-01 |
Stem Nut | 758 411.001-01 |
Crosshead | 104M-3.1 |
Crosshead | 304M-3.1 |
Crosshead finger | 104M-3.1.0 sb. |
Crosshead finger | 204M-3.3 |
The earring | 751745.001 (01) |
Oil seal | 305321.002 sb. |
Oil-slicking oil seal | 405 321 & nbsp;014sb. |
Cuff | 754171.003 |
Clients of the company "Compressor technology" can get personal consultation about products, and full information about the installation, commissioning and maintenance. The company's policy "Compressor Technology" is aimed solely at long-term relationships with our clients. In our opinion this is the key to success.