The Compressor Technologies company makes and sells spare parts for the VP2-10/9 compressor
All manufactured and supplied products are provided with a certificate of conformity and quality certificate.
The VP2-10/9 compressor is used in industry to produce compressed air with an excess pressure of 8 kgf / cm2. The VP2-10/9 compressor is able to meet the requirements of 10 m3/min.
VP2-10/9 compressor – stationary, piston, crosshead, with two-stage air compression, made on an angular base. The cylinders of the first and second stages differ in diameter, the lower part of the horizontal frame serves as a reservoir for the circulating lubrication system.
The VP2-10/9 compressor is cooled by water, which cools the main compressor components and the compressed gas. To remove water and oil from the compressed air, the compressor is equipped with moisture and oil separators.
The VP2-10/9 compressor (VP2-10/9M) can be used in all climatic zones, explosion-proof design is possible.
Buy spare parts of the compressor VP2-10/9 (VP2-10/9M).Drawing number | Name |
---|---|
sb. 1-2 | Cylinder I art. |
1-2-1 | Cylinder 1 tbsp. |
sb. 1-3 | Cylinder II art. |
sb. 1-3-1 | Cylinder II art. |
1-3-1-2 | Body |
sb. 1-4 | Cylinder cover I art. |
1-4-1 | Cover |
sb. 1-5 | Cylinder cover II art. |
sb. 1-6 | The piston |
sb. 1-6-1 | Piston I art. |
sb. 1-7 | The piston |
sb. 1-7-1 | Piston II. st. |
30-7 | Gasket |
sb. 1-1-5 VP2-10/9; VP2-10/9M | Lubrication unit |
2P-2-3 | Counterweight bolt |
M20x1. 5 N. 482-74 (75.8137.001) | Connecting Rod bolt |
M20x1. 5 N. 481-74 (75.8412.002) | Connecting Rod Bolt Nut |
502P-2 sb. | Crankshaft |
VK-108-01 N d-100.0 mm | Connecting rod inserts |
VK-108-02 N d-100.0 mm | Connecting rod inserts |
VK-108-01 P1 d-99.5 mm | Connecting rod inserts |
VK-108-02 P1 d-99.5 mm | Connecting rod inserts |
VK-108-01 R2 d-99.0 mm | Connecting rod inserts |
VK-108-02 R2 d-99.0 mm | Connecting rod inserts |
H. 426-70 | Stem Nut |
2P-1-2 | Sleeve |
1-6-1 | Piston head 1 tbsp. |
1-6-3 | Piston head 1 tbsp. |
1-7A-1 | Piston head 2 tbsp. |
1-7A-2 | Piston head 2 tbsp. |
sb. 1-7A | Piston 2 tbsp. |
sb. 1-7-1 | Piston 2 tbsp. |
U330x8 GOST 9515-81 | Ring 1 tbsp. portion. |
U200x7 GOST 9515-81 | Ring 2 tbsp. portion. |
2P19-2-5 | Pressure ring |
2P19-2-6 | Ring |
2P19-2-7 | Throttle ring |
2P19-2-12 | Ring |
2P19-2-9 | Coupling |
2-2-3A-10 | Spring |
202P-3 sb. | Crosshead |
IGSHP 49.4311.002 | Oil valve |
N. 475-73 | Check valve |
sb. 24P | Check valve |
H. 632-02 | Valve 1 art. |
H. 632-03 | Valve 2 art. |
PEAK-110-2.5 AM | Valve |
PEAK-125-0.4 AM | Valve |
PEAK-125-2.5 AM | Valve |
PEAK-125-0,4 BM | Valve |
PEAK-155-2.5 AM | Valve |
PEAK-100-4,0/27 | Locking bar |
502P-2-7A | Bearing housing |
sb. 5A-1 | Oil pump |
202P-3-1A sb. | Crosshead finger |
302P-2-2 | Counterweight |
4024107 | Bearing |
53524 | Bearing |
2P19-1 sb. | Oil seal |
32-04-5 | lubricator |
sb. 1-4 | Cylinder cover 1 tbsp. |
sb. 1-5 | Cylinder cover 2 tbsp. |
sb. 1-2 | Cylinder 1 tbsp. |
1-2-1 | Cylinder 1 tbsp. |
sb. 1-3 | Cylinder 2 tbsp. |
sb. 1-3-1 | Cylinder 2 tbsp. |
N. 528-79; N. 529-79 | Pressure lamp |
202P-4A sb. | Connecting rod |
1-6-2 | Stock 1 tbsp. |
2P19-1-3 | Stock 1 tbsp. |
2P30-1-1 | Stock 2 tbsp. |
sb. 1B | Oil filter |
HRK-2 | Refrigerator |
sb. HRK-2-400 L-890 mm (HRK-2 400 sb.) | Refrigerator pipe |
GC-4,0-1-2 1,0 | Gas Cooler |
sb. 502. 140. 200 L-2140 mm | Gas cooler pipe |
KEK-16V | Solenoid valve |
CAT-16V | Solenoid valve |
AB2-101-8 75 kW; 750 rpm; 220/380 V | Electric Motor |
2P3-3 | Nut |
2P3-4 | Nut |
2P-3-5 | Locking ring |
2P-5-1 SAT | Oil pump |
2P-5-1-3 | Driving gear |
2P-5-1-4 | Driving gear |
2P19-1-3 | Stage II rod |
2P19 - 2 sb. | Oil seal |
202P-2-9P | Ring |
sb. 1-1-5 | Lubrication unit |
180-190-58-2-2 | Ring |
300-310-58-2-2 | Ring |
350-360-58-2-2 | Ring |
1-2 | Branch pipe |
1-3 (75.4154.003) | Gasket |
1-4 | Gasket |
1-6, 1-7 | Branch pipe |
1-1-1 | Frame |
sb. 1-1-5 | Lubrication unit |
sb. 1-2A | Branch pipe |
sb. 1-6 | Piston I art. |
1-6-1 | Piston head |
1-6-2 | Stock |
1-6-3 | Piston head |
sb. 1-7A | Piston II art. |
IGSHP 75.4152.009-04 |
Clients of the company "Compressor technology" can get personal consultation about products, and full information about the installation, commissioning and maintenance. The company's policy "Compressor Technology" is aimed solely at long-term relationships with our clients. In our opinion this is the key to success.