Spare parts for compressor 305VP-16/70

The Compressor technologies company makes and sells spare parts for the compressor 305VP-16/70

All manufactured and supplied products are provided with a certificate of conformity and quality certificate

Compressor 305VP-16/70, 305 VP-16/70 stationary, piston, crosshead, four-stage, angular, water-cooled, lubricated cylinders and oil seals.

The compressor 305VP-16/70 includes the following main components: base, cylinders and electric motor.

The base consists of unified units of the crank mechanism (crankshaft, connecting rod, crosshead), the frame, the lubrication unit of the movement mechanism and the lubricator (for the lubrication of cylinders and oil seals). The frame is cast iron, box-shaped, with internal reinforcement ribs. In the upper part of the frame, there are hatches that are tightly closed with lids, providing access to the details of the movement mechanism. The lower part of the frame serves as an oil reservoir. An oil level indicator is mounted on the top of the frame. Special tides are available for attaching the compressor cylinders to the frame.

In the holes of the transverse ribs of the frame, crosshead cast-iron sleeves are installed, which serve as guides for crossheads. The crankshaft is stamped steel, with cranks for connecting rods, supported by roller bearings. For corner bases, the crankshaft is single-crank, and for balancing, counterweights are installed on the shaft. At one end of the crankshaft, an electric motor rotor is installed (keyed connection), and a square hole is made in the flange fixed to the shaft end to ensure that the compressor shaft 305VP16/70 is rotated using the handle before starting.

At the other end of the shaft, a gear is attached to transfer the rotation to the shaft of the oil pump of the lubrication unit. Crossheads of cast iron or aluminum cast or stamped, are made at the same time with sliders. The crosshead is connected to the stem by a lock nut and a lock nut, with fixed locking bolts. The crosshead is connected to the connecting rods by means of a finger.

Buy spare parts for compressor 305VP-16/70 (305 VP-16/70)

Name and drawing number
The base assembly is 505Psb.
Frame 505P-1
BSDKM15-21-12 electric motor
Electric motor stator BSDKM 15-21-12 200/500
Electric motor rotor 15-21-12
Crankshaft assembly 905P-2sb.
Crankshaft 905P-2-1 bare
Bearing 3538 GOST5721-75
Shaft helical gear 105P-2-5
Cylinder 1-3 st. assembly 405P50/15sb
Cylinder 1 st. 405P50/15-1
Cylinder 3 st. 405P50/15-2
Cylinder 2-4 st.assembly 305P27-10sb.
Cylinder 2 art. & nbsp; 405P27/10-1
Cylinder 4 st. & nbsp; 205P27/10-2
Connecting rod assembly 405P-4sb.
Connecting rod 405P-4-1
Connecting Rod bolt 105P-4-4
Connecting Rod Bolt Nut 5P4-3
Oil ring 5P-4-6
Insert VK160-01
Insert VK160-02
Thick-walled insert 105P-4-4 babit
Needle bearing 4024113
Crosshead assembly 305P-3sb.
Crosshead & nbsp; 405P-3-3
Crosshead pin 305P-3-1sb.
Stem nut embedded 105P-3-2
Locking ring 5P-3-5
Lock Nut 5P-3-1
Crosshead sleeve 5P-1-2
Cylinder liner 1 st. 205P50/15-3
Cylinder liner 2 st. 105P27/10-3
Cylinder liner 3 st. 105P50/15-3
Cylinder liner 4 st. 105P27/10-4
Rubber sleeve ring 1 st. 554-565-67-2-6
Rubber sleeve ring 2 art. 340-350-62-2-6
Rubber sleeve ring 3 art. 200-210-58-2-6
Rubber sleeve ring 4 art. 160-170-50-2-6
Piston 1-3 st. 105P50/15-2sb. assembly
Piston 1 st. 105P50/15-2-1
Piston 3 st. 105P50/15-2-3
Piston 2-4 st. 105P27/10-2sb. assembly
Piston 2 st. 205P27/10-2-1
Piston 4 st. 105P27/10-2-3
Piston ring 1 st. & nbsp;5P50/15-2-2
Piston ring 2 st. & nbsp;5P27/10-2-2
Piston ring 3 st. & nbsp;U145x6
Piston ring 4 st. & nbsp; U100x5
Stock 1-3 (2-4)  art.105P50/15-2-5
Stem nut 5P48-2-4
Valve 1 st. PIC165-0,4 AM
Valve 1 st. PIC165-2.5 AM
Valve 2 st. PIC125-2.5 AM
Valve 3 st. PIC110-2.5 AM
Valve 4 st. VKT/tubing 85-4. 0 M2
PIK 165-0. 4/2. 5 A plate Set
PIC125-2.5 A Plate Set
PIC110-2.5 A plate Set
Set of springs and plates VKT/NKT 70-4. 0 M2
Locking bar PIC100-4,0/27
Valve cover 1 st. 5P48-8
Valve cover 2 art 125-20-1
Valve cover 3 art. 110-40-1
Valve cover 4 st. 5P27/10-6
Pressure cup 1 st. P165
Pressure glass 2 tbsp P125
Pressure glass 3 st. 2M19-4
Pressure cup 4 st. SN. 01. 00. 06
Oil seal 1-3 st. 50-2sb. assembly
O-ring 50/18
Oil-slicking ring 50/19 (50/34)
Spring 50/20
Pressure ring 50/11
Pressure ring 50/12
Coupling 50/14
Throttle ring 50/13
Rubber ring 105-110-33-2-6
Cuff 50/11 (50/34)
Oil seal 2-4 st. 50-3sb. assembled
Cuff 50/11 (50/34)
Throttle ring 50/13
Spring 50/20
Rubber ring 105-110-33-2-6
Lubrication unit assembly 305P-5sb.
Housing unit 405P-5-1
Oil check valve 306.593.001 sb.
Fine oil filter 63-125-2
Lube station (lubricator) 31-04-2 UHL4
Gear oil pump assembly 5P-5-1 sb.
Pump housing 5P-5-1-1
Helical gear 5P-5-1-4
Driving gear 2SG50-0750
Driven Gear 2SG50-0706
5P driven roller-5-1-6
Leading roller 205P-5-1-3
Refrigerator 1 tbsp. 1HRK10
Refrigerator & nbsp; 2 st. HRK9/25
Refrigerator 3 st. HRK3/40
Refrigerator 4 st. HRD-2
Aluminum finned pipe 1 st. L=1220
Aluminum finned pipe 2 st. L=1800
Aluminum finned pipe 3 st. L=1350
Aluminum finned pipe 4 tbsp. L=2100

Our advantages:

Short delivery times for equipment
Warranty and real service
Technical support in the course of work
Profitable solutions for production